Wsdcam Door Window Alarm Home Security Alarms Wireless Alarm Anti-Theft Remote Control Alarm and Host Sensor Door Alarm Alarma
-Host 2AAA alkaline batteries to operate ( not included )
-An 12V/27A alkaline batteries ( not included ) of the remote control to operate
-Door Alarm/Sensor Alarm/Window Alarm/Wireless Door Alarm/Remote Control Alarm/Door Security Alarm
Select windows and doors to the installation location, with water and cloth to clean the mounting surface, the double-sided adhesive tape on the bottom and then this machine is attached to the clean position
Installed host, and then double-sided stickers magnets host next door or door frame, pay attention to set the magnetic iron arrow at the arrow to the right host.
Ensure close the door the host and the magnet installation distance should not exceed 10mm.
Arming and disarming
When you are at home when you encounter an intruder or other emergency situations, the remote control [flash] is pressed on the key host will ring alarm.
Emergency function keys are valid in any mode.
Increase the remote control
You can increase the remote control depending on your needs see the instruction set
1 * Security Alarm
1 * Magnetic Stick
1 * Remote Control When the door and window are separated (the door magnetic host and the magnetic strip are separated), the alarm immediately sounds an alarm. Press the arming button on the remote control in standby mode, the main unit will ring “Bi Bi Bi”, and the host enters the arming mode. Battery standby for one year Wall remote control -No serial code, no code loss Easy to install, ready to use One to one, many to one Free match, family sharing When you encounter a thief or other emergency at home, pressing the emergency button on the remote will sound a 30 second alarm, and the emergency function button will work in any mode. 1. When the host is not in the armed mode, press the doorbell button on the remote control. The receiving host will prompt the doorbell to DingDong.. and enter the doorbell mode. In this mode, the door and window are opened to ring the doorbell to remind the door and window to be opened. 2. Press the exit doorbell button or press the arming button in the doorbell mode to automatically exit the doorbell mode. Installation Display During installation, the magnetic strip is tightly mounted within 1 cm of the host, so that the door and window can be alarmed when the door and window are opened. The door is installed in parallel with the door frame Glass door installation Sliding window installation Casement window installation