Sale!

Car Motorcycle GPS tracker T3 car start detection ACC OIL-CUT function high speed platform Android IOS APP

$16.00$19.00

Clear
SKU: 32849396196 Category:

Description

T3 is a Mini intelligent GPS Vehicle positioning terminal. It combines the GSM wireless communication technology and GPS positioning system technology,terminals using industrial-grade highly integrated design,intelligent power-saving and passive drift suppression,installation is simple,connect the power supply to start work immediately,wide inpute voltage range,wide applicable to all types of cars,motor cycles,electric cars,ships,etc., can provide all-weather,real-time vehicle positioning function,with global positioning service platform,you can achieve remote vehicle management.

1).The tracker is GSM 2G device,should use sim card which support GSM 2G network.

2).Should put sim card first,then connect with external power.

1.Device feature

Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or internet.

Overview of the characteristics:

1.GPS position.

2.GSM 850/900/1800/1900MHZ.

3.With Shock sensor.

4.Power-Cut alarm.

5.Auto set APN.

6.Voltage 9-40V.

7.Oil-cut function.

2.Platform:

The platform free use for 1 year,from second year,$5/year/pcs.

3.app:

4.Device wiring

<p>  <img class="img-responsive" src="https://ae01.alicdn.com/kf/HTB14X5hNpXXXXaQXpXXq6xXFXXXe/122650925/HTB14X5hNpXXXXaQXpXXq6xXFXXXe.jpg?size=29821&amp;height=345&amp;width=430&amp;hash=1bca6801271d2c6a8dc732def9e41640" /></p>   <p> 5. SMS Commands instruction</p> <table>  <tbody>   <tr>    <td colspan="3"> <p> 1)Administrator Number </p> </td>   </tr>   <tr>    <td> <p> Text command </p> </td>    <td> <p> Parameter </p> </td>    <td> <p> Sample </p> </td>   </tr>   <tr>    <td> <p> CENTER Add </p> </td>    <td> <p> 710#number# </p> <p> 711#number# </p> </td>    <td> <p> 710#13500135000# </p> <p> 711#13800138000# </p> </td>   </tr>   <tr>    <td> <p> CENTER Del </p> </td>    <td> <p> D01# </p> <p> D02# </p> </td>    <td> <p> D01# </p> <p> D02# </p> </td>   </tr>   <tr>    <td> <p> Command Description </p> </td>    <td colspan="2"> <p> 1)Center number can control the oil and power and resume factory settings </p> <p> 2) Center number can receive the call and text of vibration alarm and over speeding alarm. </p> <p> 3) SIM must display the income call number to control oil and power. </p> <p> 4) Only one number can be center number. </p> <p> 5) Change center number must resend the command. </p> <p> 6)Add new center number by CETNER,A, and delete by CENTER,D </p> </td>   </tr>   <tr>    <td> <p> Command Feedback </p> </td>    <td colspan="2"> <p> Successful Setting:Add admin account 1 OK! </p> </td>   </tr>  </tbody> </table>  <table>  <tbody>   <tr>    <td colspan="4"> <p align="left"> 2) View Administrator Number </p> </td>   </tr>   <tr>    <td> <p> Text command </p> </td>    <td> <p> Parameter </p> </td>    <td colspan="2"> <p> Sample </p> </td>   </tr>   <tr>    <td> <p> View </p> </td>    <td colspan="2"> <p> 901# </p> </td>    <td> <p> 901# </p> </td>   </tr>   <tr>    <td> <p> Command Description </p> </td>    <td colspan="3"> <p align="left"> This directive is used to view Device Manager number. </p>  </td>   </tr>   <tr>    <td> <p> Command Feedback </p> </td>    <td colspan="3"> <p> Successful Setting:Admin1: </p> <p>                    Admin2: </p> </td>   </tr>   <tr>                   </tr>  </tbody> </table>  <table>  <tbody>   <tr>    <td colspan="3"> <p align="left"> 3)Authorized Number Set </p> </td>   </tr>   <tr>    <td> <p> Text command </p> </td>    <td> <p> Parameter </p> </td>    <td> <p align="left"> Sample </p> </td>   </tr>   <tr>    <td> <p> Authorized Add </p> </td>    <td> <p> 101# number # </p> <p> 102# number # </p> <p> 103# number # </p>  </td>    <td> <p> 1:101#13800138000# </p> <p> 2:102#12345678912# </p> <p> 3:103#12345678912# </p>  </td>   </tr>   <tr>    <td> <p> Authorized Del </p> </td>    <td> <p> D11# </p> <p> D12# </p> <p> D13# </p> </td>    <td> <p> D11# </p> <p> D12# </p> <p> D13# </p> </td>   </tr>   <tr>    <td> <p> Command Description </p> </td>    <td colspan="2"> <p align="left"> 1) Authorization number for SMS control oil. </p> <p align="left"> 2) only three numbers to set the authorization number </p> <p align="left"> 3) change the authorization number needs to delete the previous number </p>  </td>   </tr>   <tr>    <td> <p> Command Feedback </p> </td>    <td colspan="2"> <p> Successful Setting:Add Authorization account 1 OK! </p> </td>   </tr>  </tbody> </table>  <table>  <tbody>   <tr>    <td colspan="3"> <p> 4) View Authorized Number </p> </td>   </tr>   <tr>    <td> <p> Text command </p> </td>    <td> <p> Parameter </p> </td>    <td> <p align="left"> Sample </p> </td>   </tr>   <tr>    <td> <p> View authorized </p> </td>    <td> <p align="center"> C10# </p> </td>    <td> <p align="center"> C10#  </p> </td>   </tr>   <tr>    <td> <p> Command Description </p> </td>    <td colspan="2"> <p align="left"> This directive is used to view the equipment authorization number </p> </td>   </tr>   <tr>    <td> <p> Command Feedback </p> </td>    <td colspan="2"> <p> Successful Setting: </p> <p> Authorization 1: </p> <p> Authorization 2: </p> <p> Authorization 3: </p> </td>   </tr>  </tbody> </table>  <table>  <tbody>   <tr>    <td colspan="3"> <p> 5)APN Setting </p> </td>   </tr>   <tr>    <td> <p> Text command </p> </td>    <td> <p> Parameter </p> </td>    <td> <p> Sample </p> </td>   </tr>   <tr>    <td> <p> APN Setting </p> </td>    <td> <p> APN#username#password] </p> </td>    <td> <p> 1:APN#intenet#123#123# </p> <p> 2: APN#internet# </p> </td>   </tr>   <tr>    <td> <p> Command Description </p> </td>    <td colspan="2"> <p> APN differs according to the local telecom operators. </p> <p> For example:APN request password,please refer to Sample 1,and Sample 2 for no password. </p> </td>   </tr>   <tr>    <td> <p> Command Feedback </p> </td>    <td colspan="2"> <p> Successful Setting:SET APN OK! </p> </td>   </tr>  </tbody> </table>  <table>  <tbody>   <tr>    <td colspan="3"> <p> 6) Set / View Server </p> </td>   </tr>   <tr>    <td> <p> Text command </p> </td>    <td> <p> Parameter </p> </td>    <td> <p> Sample </p> </td>   </tr>   <tr>    <td> <p> SERVER Parameter </p> </td>    <td> <p> 803#SERVER # port# </p> </td>    <td> <p> 803#222.217.240.243#8011# </p> </td>   </tr>   <tr>    <td> <p> View SERVER </p> </td>    <td> <p> CIP# </p> </td>    <td> <p> 1)CIP# </p> </td>   </tr>   <tr>    <td> <p> Command Description </p> </td>    <td colspan="2"> <p> Change the IP and port when move to a new server </p> <p> port:10~65535 </p> <p> 1 is domain and 0 is IP; </p> </td>   </tr>   <tr>    <td> <p> Command Feedback </p> </td>    <td colspan="2"> <p> Successful Setting:set IP OK! </p> </td>   </tr>  </tbody> </table>  <table>  <tbody>   <tr>    <td colspan="3"> <p> 7)Moving Time Interval </p> </td>   </tr>   <tr>    <td> <p> Text command </p> </td>    <td> <p> Parameter </p> </td>    <td> <p> Sample </p> </td>   </tr>   <tr>    <td> <p> TIMEER Parameter setting </p> </td>    <td> <p> 730#uploading interval#  </p> </td>    <td> <p> 730#20# </p> </td>   </tr>   <tr>    <td> <p> Command Description </p> </td>    <td colspan="2"> <p> Time scope:0,10~60 seconds; 0,no data uploading; </p> <p> 10~60,means time interval;the default value is 15 seconds! </p> </td>   </tr>   <tr>    <td> <p> Command Feedback </p> </td>    <td colspan="2"> <p> Successful Setting:SET TIMER OK! </p> </td>   </tr>  </tbody> </table>  <table>  <tbody>   <tr>    <td colspan="3"> <p> 8)Static Time Interval </p> </td>   </tr>   <tr>    <td> <p> Text command </p> </td>    <td> <p> Parameter </p> </td>    <td> <p> Sample </p> </td>   </tr>   <tr>    <td> <p> STATIC </p> </td>    <td> <p> SUP# time interval# </p> </td>    <td> <p> SUP#5# </p> </td>   </tr>   <tr>    <td> <p> Command Description </p> </td>    <td colspan="2"> <p> Timescope:1~60 seconds;The device has </p> <p> 3D transmission and the default time interval are 5 minutes. </p> </td>   </tr>   <tr>    <td> <p> Command Feedback </p> </td>    <td colspan="2"> <p> Successful Setting:SET STATIC TIME OK! </p> </td>   </tr>  </tbody> </table>  <table>  <tbody>   <tr>    <td colspan="3"> <p> 9) Cancel the continuous upload  </p> </td>   </tr>   <tr>    <td> <p> Text command </p> </td>    <td> <p> Parameter </p> </td>    <td> <p> Sample </p> </td>   </tr>   <tr>    <td> <p> NUP </p> </td>    <td> <p> NUP# </p> </td>    <td> <p> NUP# </p> </td>   </tr>   <tr>    <td> <p> Command </p> <p> Description </p> </td>    <td colspan="2"> <p> This command is used to cancel sending data to the platform </p> <p> If need again to restore the upload , you need to send TIMEER Parameter setting. </p> </td>   </tr>   <tr>    <td> <p> Command Feedback </p> </td>    <td colspan="2"> <p> SET OK! </p> </td>   </tr>  </tbody> </table>  <table>  <tbody>   <tr>    <td colspan="3"> <p> 10)Power-Cut </p> </td>   </tr>   <tr>    <td> <p> Text command </p> </td>    <td> <p> Parameter </p> </td>    <td> <p> Sample </p> </td>   </tr>   <tr>    <td> <p> RELAYParameter1 </p> </td>    <td> <p> 222# </p> </td>    <td> <p> 222#   cut off oil and power </p> </td>   </tr>   <tr>    <td> <p> RELAYParameter2 </p> </td>    <td> <p> 333# </p> </td>    <td> <p> 333#  recover oil and power </p> </td>   </tr>   <tr>    <td>  <p> Command Description </p> </td>    <td colspan="2"> <p> 1)RELAY control the start and closeness of the relay </p> <p> 2) Only the center number can operate. </p> <p> 3)the device only cut off the oil circuit on the condition of the driving speed below 20KM/H or in static state. </p> <p> 4)When send the command, the device will reply “please waiting “When the vehicle speed is over 20KM/H, the device will cut off the oil or the power when the speed below 20KM/H. </p> </td>   </tr>   <tr>    <td>  <p> Command Feedback </p> </td>    <td colspan="2">  <p> Successful Setting:Fuel cut has already been completed OK! </p> </td>   </tr>  </tbody> </table>  <table>  <tbody>   <tr>    <td colspan="3"> <p> 11)GMT </p> </td>   </tr>   <tr>    <td> <p> Text command </p> </td>    <td> <p> Parameter </p> </td>    <td> <p> Sample </p> </td>   </tr>   <tr>    <td> <p> GMT </p> </td>    <td> <p> 801#location, time# </p> </td>    <td> <p> 801#E8# </p> </td>   </tr>   <tr>    <td> <p> Command Description </p> </td>    <td colspan="2"> <p> The default time zone is Beijing time. If time zone need revised, please operate according to the above command. </p> </td>   </tr>   <tr>    <td> <p> Command Feedback </p> </td>    <td colspan="2"> <p> Successful Setting:Set time zone ok! </p> </td>   </tr>  </tbody> </table>  <table>  <tbody>   <tr>    <td colspan="3"> <p> 12)Vibration Sensitivity </p> </td>   </tr>   <tr>    <td> <p> Text command </p> </td>    <td> <p> Parameter </p> </td>    <td> <p> Sample </p> </td>   </tr>   <tr>    <td> <p> VIBRATION Parameter </p> </td>    <td> <p> 123#2#,alarming way# </p> </td>    <td> <p> 1) 123#2#3# </p> </td>   </tr>   <tr>    <td> <p> Set into vibration alarm time </p> </td>    <td> <p> V123#2#   </p> </td>    <td> <p> 1) V123#2# </p> <p> 2) V123#1# </p> </td>   </tr>   <tr>    <td> <p>    Cancel vibration alarm </p> </td>    <td> <p> 456# </p> </td>    <td> <p> 456# </p> </td>   </tr>   <tr>    <td> <p> Command Description </p> </td>    <td colspan="2"> <p> the sensitivity  value of the vibration is from 1 to 5,1is the most sensitive and o is close. Alarming ways: 1, calling 2, texting, 3 calling and texting. </p> <p> Must set the center number and receiving number. </p> </td>   </tr>   <tr>    <td> <p> Command Feedback </p> </td>    <td colspan="2"> <p> set vibration alarm level,OK! </p> </td>   </tr>  </tbody> </table>  <table>  <tbody>   <tr>    <td colspan="3"> <p> 13)Speeding </p> </td>   </tr>   <tr>    <td> <p> Text command </p> </td>    <td> <p> Parameter </p> </td>    <td> <p> Sample </p> </td>   </tr>   <tr>    <td> <p> SPEEDING Parameter </p> </td>    <td> <p> SSA#120# alarming way# </p> </td>    <td> <p> 1)SPEEDING,120,3# </p> <p> 2)SPEEDING,120# </p> </td>   </tr>   <tr>    <td> <p> Command Description </p> </td>    <td colspan="2"> <p> The speed scope is form 60-220, if the speed is no this cope, the alarm is off. </p> <p> Alarming :1, calling 2, texting, 3 calling and texting. </p> <p> Must set the center number and receiving number. </p> </td>   </tr>   <tr>    <td> <p> Command Feedback </p> </td>    <td colspan="2"> <p> Successful Setting:set speeding alarm,OK! </p> </td>   </tr>  </tbody> </table>  <table>  <tbody>   <tr>    <td colspan="3"> <p> 14)Reset </p> </td>   </tr>   <tr>    <td> <p> Text command </p> </td>    <td> <p> Parameter </p> </td>    <td> <p> Sample </p> </td>   </tr>   <tr>    <td> <p> RESET </p> </td>    <td> <p> 930# </p> </td>    <td> <p> 930# </p> </td>   </tr>   <tr>    <td> <p> Command Description </p> </td>    <td colspan="2"> <p> Reset the device </p> </td>   </tr>   <tr>    <td> <p> Command Feedback </p> </td>    <td colspan="2"> <p> Successful Setting:Reset system, ok! </p> </td>   </tr>  </tbody> </table>  <table>  <tbody>   <tr>    <td colspan="3"> <p> 15)Factory </p> </td>   </tr>   <tr>    <td> <p> Text command </p> </td>    <td> <p> Parameter </p> </td>    <td> <p> Sample </p> </td>   </tr>   <tr>    <td> <p> Parameter </p> </td>    <td> <p> 940# </p> </td>    <td> <p> 940# </p> </td>   </tr>   <tr>    <td> <p> Command Description </p> </td>    <td colspan="2"> <p> Restore the factory setting </p> <p> Only center number can initial this function </p> <p> Factory setting will recover to the original setting </p> </td>   </tr>   <tr>    <td> <p> Command Feedback </p> </td>    <td colspan="2"> <p> Successful Setting:FACTORY OK! </p> </td>   </tr>  </tbody> </table>  <table>  <tbody>   <tr>    <td colspan="3"> <p> 16)Language Setting </p> </td>   </tr>   <tr>    <td> <p> Text command </p> </td>    <td> <p> Parameter </p> </td>    <td> <p> Sample </p> </td>   </tr>   <tr>    <td> <p> LANG Parameter </p> </td>    <td> <p> LANG1# </p> <p> LANG0# </p> </td>    <td> <p> LANG1#  1:CHINESE, </p> <p> LANG0#:ENGLISH </p> </td>   </tr>   <tr>    <td> <p> Command Description </p> </td>    <td colspan="2"> <p> ;When check the location, it will reply the Chinese location in Chinese language setting; while reply the URL link when in English language setting. </p> </td>   </tr>   <tr>    <td> <p> Command Feedback </p> </td>    <td colspan="2"> <p> Successful Setting:SET LANG OK! </p> </td>   </tr>  </tbody> </table>  <table>  <tbody>   <tr>    <td colspan="3"> <p> 17)Position </p> </td>   </tr>   <tr>    <td> <p> Text command </p> </td>    <td> <p> Parameter </p> </td>    <td> <p> Sample </p> </td>   </tr>   <tr>    <td> <p> WHERE </p> </td>    <td> <p> 988# </p> </td>    <td> <p> 988# </p> </td>   </tr>   <tr>    <td> <p> Command Description </p> </td>    <td colspan="2"> <p> Check the longitude and altitude  and other information of the device </p> </td>   </tr>   <tr>    <td> <p> Command Feedback </p> </td>    <td colspan="2"> <p> Reply with longitude and altitude, speed and IMEL. </p> </td>   </tr>  </tbody> </table>  <table>  <tbody>   <tr>    <td colspan="3"> <p> 18)Google Link </p> </td>   </tr>   <tr>    <td> <p> Text command </p> </td>    <td> <p> Parameter </p> </td>    <td> <p> Sample </p> </td>   </tr>   <tr>    <td> <p> WHERE </p> </td>    <td> <p> 666# </p> </td>    <td> <p> 666# </p> </td>   </tr>   <tr>    <td> <p> Command Description </p> </td>    <td colspan="2"> <p> Check the location link of Google map </p> </td>   </tr>   <tr>    <td> <p> Command Feedback </p> </td>    <td colspan="2"> <p>  

maps.google.com/maps?q=N22.540885,E113.95265

19)Version

Text command

Parameter

Sample

VERSION

V00#

V00#

Command Description

The command is to check the software version

Command Feedback

VERSION:Xxxx

BUILD:2012-07-05 10:12

20)Param Check

Text command

Parameter

Sample

PARAM

886#

886#

Command Description

The command is to check the settings and the default parameter.

Command Feedback

IMEI:351190012535936

APN : cmnet

IP:IP and port

TIMER: moving uploading interval

STATIC: static uploading interval

CENTER: center number

LANG: language(CN/EN)

GMT: time zone (E/W8)

21)Status Check

Text command

Parameter

Sample

STATUS

902#

902#

Command Description

The command is designed for checking the device’s working status.

Command Feedback

External power:ON/OFF

GSM Signal:HIGH/MIDDLE/LOW

GPS:FIXED/UNFIXED

RELAYER:DISABLE/ENABLE

Vibrate Warning:ON/OFF

Pause:ON/OFF

22)ACC Alarm

Text command

Parameter

Sample

Open ACC detection

840#1#

840#1#

Close ACC detection

840#0# 840#0#
      <em>USD 5.00-30.00</em>/piece<em>USD 27.39-29.88</em>/piece<em>USD 12.75-13.00</em>/piece<em>USD 11.76-12.60</em>/piece<em>USD 651.53</em>/lot<em>USD 10.45-12.35</em>/piece<em>USD 17.01</em>/piece<em>USD 574.52</em>/lot

Additional information

Weight 0.2 kg
Dimensions 11 × 9 × 5 cm
GPS type

GPS Tracker

Out Power

<0.2W

Item Size

78(L)X26(W)X15(H)MM

Model Name

T3

Gps Module

Yes

Brand Name

DYEGOO

NETWORK

GSM 2G NETWORK

WORK VOLTAGE

9V–80V

GSM CHIP

MT6261

GPS CHIP

UBLOX7020

OIL-CUT FUNCTION

YES

ACC DETECTING FUNCTION

YES

ANDROID & IOS APP

YES

PLATFORM

HIGH SPEED

POWER-ON WAY

AFTER SIM CARD PUT IN,POWER ON

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

%d bloggers like this: